Skip to content

Your choice is stored for a year. You can change it at any time — the "Cookie settings" link is at the bottom of every page.

Learn more in the cookie policy.

RUICHI — home
Catalog
Contact us

RUICHI patch panels. Selection criteria.

RUICHI patch panel is a specialized part used for patching in complex cabling systems. In appearance and design, it is a metal bar with built-in ports. On the rear of the part are IDC punch-down contacts

Modern patch panels are highly specialized components used to create connection points when laying electrical networks in shopping centers, office buildings, large enterprises, etc.

RUICHI patch panel is a specialized component used for switching in complex cabling systems. In appearance and design, it is a metal strip with built-in ports. On the rear of the component are IDC punch-down contacts.

Types of patch panels

RUICHI manufactures various types of patch panels:

  • Components with modular ports. In design, these are simple bracket frames into which various ports can be installed. This makes it possible to create a unique combination of connectors, allowing a non-standard network to be set up.
  • Components with fixed ports. The most popular type of patch panel. On the front side there are several RJ-45 ports. They are all identical, with equal technical characteristics. They cannot be replaced with others or used to make non-standard selections. The rear panel is a platform equipped with punch-down contacts. Active equipment is connected on the rear side, and patch cords are plugged into the ports on the front, through which connection is made to other equipment further down the line.

Panels with replaceable modules are the cheaper option. However, when fitting them with new modules, it is important to choose ports marked "slim", which means a narrow design.

Depending on mounting features, patch panels are available:

  • 19-inch – the most common; they are easy to install on specialized server racks and in switching cabinets (using brackets made for this standard);
  • 10-inch – designed for installation in small switching cabinets (compared with 19-inch ones, they are smaller and have fewer ports);
  • wall-mounted – a separate group of patch panels that are universal in terms of mounting and do not require specialized platforms (they are equipped with removable brackets for wall mounting).

Types of patch panels by degree of EMF protection:

  • Shielded STP – in such components the connectors on different sides are covered by metal plates, which blocks electromagnetic radiation. A metal cover is fixed over the platform equipped with IDC contacts. In addition, shielded STP panels have separate elements for grounding.
  • Unshielded UTP – such patch panels have no additional EMF protection. They are installed in electrical networks where any other components are also unshielded. Because of this, they are laid away from any high-power electronic equipment and EMF sources.

There are other parameters by which RUICHI patch panels are divided into separate types.

By category – for telephony, for data transmission at speeds up to 100 Mb/s, for information transmission at speeds not exceeding 1 Gb/s, for data transmission at speeds above 1 Gb/s.

Depending on the presence of a cable manager, the patch panel can be mounted in various positions.
By mounting height – can be 2U, 1U, 0.5U.

The information presented above will help answer the question of which RUICHI patch panel is best to choose for a particular situation.

Other news

All news →