Skip to content

Your choice is stored for a year. You can change it at any time — the "Cookie settings" link is at the bottom of every page.

Learn more in the cookie policy.

RUICHI — home
Catalog
Contact us
1007 AWG26 2.54mm C3-02M RB — photo 1

1007 AWG26 2.54mm C3-02M RB

RUICHI Board-to-Board Power Cable (Socket), Series 1007, Conductor Cross-Section 0.12 mm2 (26AWG), Connector Pitch 2.54 mm, 0…+80 °C, Insulation Color Red/Black, Connector Housing Nylon 66 UL94V-0

Product overview
Item code124171
Model1007 AWG26 2.54mm C3-02M RB

Specifications

ParameterValueSelect
CategoryCable Products › Cable Assemblies and Cords › Interface › Board-to-Board and Unit-to-Unit Power
Operating Temperature Range0…+80 °C
Wire Length200 mm
Number of contacts2
Number of wires2
Housing materialNylon 66 UL94V-0
Wire cross-section0.129 mm2
Cable type1007 series board-to-board power cable (socket)
Connector typeC3
Wire insulation colorred, black
Connector pitch2.54 mm
Select parameters to find similar products

Description

Board-to-board power cable (female) RUICHI 1007 series, conductor cross-section 0.12 mm2 (26AWG), connector pitch 2.54 mm, 0…+80 °C, insulation color red/black, connector housing Nylon 66 UL94V-0. Different electrical voltages are used to power various computer components. The power supply has output connectors for 3.3 V, 5.0 V, 12 V and other voltages. Accordingly, all board-to-board power cables mating with these connectors are color-coded. Despite the abundance of wires supplying power to various computer components, the different connector configurations prevent incorrect connection. For example, the motherboard is powered via a wide 20-pin connector plus four additional pins; special connectors are installed on the wires going to the graphics card, hard drive, card reader, disk drives and fans. If connectors do not match due to a standard change, board-to-board power cables are always available as adapters from one connector type to another. All these cables are strictly standardized in length, so they are clearly long enough for connection within the system unit enclosure, while there is no excess wire that would impede airflow.

Documents and media

Product photo
Photo 1

Product inquiry

Technical questions, analog selection, samples and documentation. Reply will be sent to the email specified in the form.

1007 AWG26 2.54mm C3-02M RB

Item code 124171 · Board-to-Board and Unit-to-Unit Power

— required fields