Skip to content

Your choice is stored for a year. You can change it at any time — the "Cookie settings" link is at the bottom of every page.

Learn more in the cookie policy.

RUICHI — home
Catalog
Contact us
2468 AWG26 2.54mm C3-04 L=300mm — photo 1

2468 AWG26 2.54mm C3-04 L=300mm

RUICHI 4-Pole Board-to-Board Power Cable, Series 2468, AWG26, 2.54 mm Pitch, 0.3 m, C3 Connector

Product overview
Item code94652
Model2468 AWG26 2.54mm C3-04 L=300mm

Specifications

ParameterValueSelect
CategoryCable Products › Cable Assemblies and Cords › Interface › Board-to-Board and Unit-to-Unit Power
Wire Length300 mm
Wire cross-section0.129 mm2
Connector typeC3, 4-pole
Wire insulation colorlilac (PVC)
Connector pitch2.54 mm
Select parameters to find similar products

Description

RUICHI four-pole board-to-board power cable, 2468 series, AWG26, 2.54 mm pitch, 0.3 m, C3 connector. Different electrical voltages are used to power various computer components. The power supply unit has output connectors for 3.3 V, 5.0 V, 12 V and other voltages. Accordingly, all board-to-board power cables mating with these connectors are color-coded. Despite the abundance of wires supplying power to various computer components, the different connector configurations prevent incorrect connection. For example, the motherboard is powered via a wide 20-pin connector plus four additional pins; special connectors are installed on the wires going to the graphics card, hard drive, card reader, disk drives and fans. If connectors do not match due to a standard change, board-to-board power cables are always available as adapters from one connector type to another. All these cables are strictly standardized in length, so they are clearly sufficient for connection within the system unit case, while there is no excess of wires impeding airflow.

Documents and media

Product photo
Photo 1

Product inquiry

Technical questions, analog selection, samples and documentation. Reply will be sent to the email specified in the form.

2468 AWG26 2.54mm C3-04 L=300mm

Item code 94652 · Board-to-Board and Unit-to-Unit Power

— required fields