Skip to content

Your choice is stored for a year. You can change it at any time — the "Cookie settings" link is at the bottom of every page.

Learn more in the cookie policy.

RUICHI — home
Catalog
Contact us
51003 AWG26 2.00mm L=150mm RBY — photo 1
  • Photo 1
  • Photo 2
  • Photo 3
  • Drawing 1

51003 AWG26 2.00mm L=150mm RBY

RUICHI Board-to-Board Power Cable Kit (Plug-Socket), Series 5100, Conductor Cross-Section 0.12 mm2 (26AWG), 3 Contacts, 3-Pole, Connector Pitch 2.00 mm, 0…+80 °C, Wire Length 150 mm, Insulation Color Red/Black/Yellow, Connector Housing PVC

Drawing

Product overview
Item code123006
Model51003 AWG26 2.00mm L=150mm RBY

Specifications

ParameterValueSelect
CategoryCable Products › Cable Assemblies and Cords › Interface › Board-to-Board and Unit-to-Unit Power
Conductor Diameter (Cross-Section)0.12 mm2 (26AWG), insulation - PVC 0.4 mm
Wire Length2*150
Number of contacts3
Housing materialPVC
Wire cross-section0.12 (26AWG) mm2
TypeFemale-Male
Cable type5100 series board-to-board power cable kit (plug-socket)
Connector type3-pole
Wire insulation colorred, black, yellow
Connector pitch2 mm
Select parameters to find similar products

Description

RUICHI 5100 series board-to-board power cable kit (plug-socket), conductor cross-section 0.12 mm2 (26AWG), 3 contacts, three-pole, connector pitch 2.00 mm, 0…+80 °C, wire length 150 mm, insulation color red/black/yellow, connector housing PVC. Different electrical voltages are used to power various computer components. The power supply has output connectors for 3.3 V, 5.0 V, 12 V and other voltages. Accordingly, all board-to-board power cables mating with these connectors are color-coded. Despite the abundance of wires supplying power to various computer components, the different connector configurations prevent incorrect connection. For example, the motherboard is powered via a wide connector with 20 contacts plus four additional ones; special connectors are installed on the wires going to the graphics card, hard drive, card reader, disk drives and fans. If connectors do not match due to a standard change, board-to-board power cables in the form of adapters from one connector type to another can always be found. All these cables are strictly standardized in length, so they are clearly sufficient for connection within the system unit case, while there is no excess of wires impeding air flow.

Documents and media

Product photo
Photo 1Photo 2Photo 3
Schematics and drawings
Drawing 1

Drawing

Drawing 51003 AWG26 2.00mm L=150mm RBY

Wheel — zoom, drag — pan, double-click — zoom inZoom — two fingers or double tap

Open original

Product inquiry

Technical questions, analog selection, samples and documentation. Reply will be sent to the email specified in the form.

51003 AWG26 2.00mm L=150mm RBY

Item code 123006 · Board-to-Board and Unit-to-Unit Power

— required fields