51004 AWG26 2.00mm L=150mm RBYG
RUICHI Board-to-Board Power Cable Kit (Plug-Socket), Series 5100, Conductor Cross-Section 0.12 mm2 (26AWG), 4 Contacts, 4-Pole, Connector Pitch 2.00 mm, 0…+80 °C, Wire Length 150 mm, Insulation Color Red/Black/Yellow/Green, Connector Housing PVC
| Item code | 123007 |
|---|---|
| Model | 51004 AWG26 2.00mm L=150mm RBYG |
Description
RUICHI 5100 series board-to-board power cable kit (plug-socket), conductor cross-section 0.12 mm2 (26AWG), 4 contacts, four-pole, connector pitch 2.00 mm, 0…+80 °C, wire length 150 mm, insulation color red/black/yellow/green, connector housing PVC. Different electrical voltages are used to power various computer components. The power supply has output connectors for 3.3 V, 5.0 V, 12 V and other voltages. Accordingly, all board-to-board power cables mating with these connectors are color-coded. Despite the abundance of wires supplying power to various computer components, the different connector configurations prevent incorrect connection. For example, the motherboard is powered via a wide connector with 20 contacts plus four additional ones; special connectors are installed on the wires going to the graphics card, hard drive, card reader, disk drives and fans. If connectors do not match due to a standard change, board-to-board power cables in the form of adapters from one connector type to another can always be found. All these cables are strictly standardized in length, so they are clearly sufficient for connection within the system unit case, while there is no excess of wires impeding air flow.
Documents and media
- Schematics and drawings
- Drawing 1
Drawing
Wheel — zoom, drag — pan, double-click — zoom inZoom — two fingers or double tap
Open originalProduct inquiry
Technical questions, analog selection, samples and documentation. Reply will be sent to the email specified in the form.
51004 AWG26 2.00mm L=150mm RBYG
Item code 123007 · Board-to-Board and Unit-to-Unit Power

