АД-7А-10
Damped support shock mount RUICHI AD-7A-10, 7…10 kg, thread M6, body diameter 58 mm, -60...+70 °C
| Item code | 124190 |
|---|---|
| Model | АД-7А-10 |
Description
RUICHI AD-7A-10 damped support shock absorber, 7…10 kg, M6 thread, body diameter 58 mm, -60...+70 °C, is designed to protect equipment from vertically applied vibration and shock loads. The shock absorber is used in heavy, aviation and oil and gas industries.
The shock absorber body contains two main components providing protection against vibration and shock loads. The main damping device is a rubber chamber (bladder). At the bottom, the bladder is vulcanized to a metal flange with a calibrated hole. The hole diameter is calculated so that under loads the air passing through the hole is retarded, creating a friction effect. The entire damping system is stabilized by a conical spring located inside the bladder. The body, support plate and rod of the shock absorber are made of metal. To limit the ingress of moisture and abrasive particles into the working area, a rubber seal is installed between the body and the rod. For mounting equipment, the shock absorber rod has a calibrated threaded hole. The support plate is also provided with four holes for fastening to a surface.
The optimal conditions for using the AD-1A-0.6 shock absorber are:
- ambient temperature - from -60 to +70 °C;
- relative humidity of ambient air - 95%-98% at a temperature of 20±2 °C;
- atmospheric pressure - up to 25.3 hPa;
- vibration with a frequency of 15 Hz, 40 Hz, 80 Hz respectively with acceleration of 4.4 m/s2, 31.4 m/s2, 49.0 m/s2;
- shock load of 10000 impacts with acceleration of 39.2 m/s2 and shock pulse duration of 0.015 s - 0.005 s.
Documents and media
- Documentation
- Documentation, PDF
- Product photo
- Photo 1
- Schematics and drawings
- Drawing 1
Drawing
Wheel — zoom, drag — pan, double-click — zoom inZoom — two fingers or double tap
Open originalProduct inquiry
Technical questions, analog selection, samples and documentation. Reply will be sent to the email specified in the form.
АД-7А-10
Item code 124190 · Shock Mounts