Skip to content

Your choice is stored for a year. You can change it at any time — the "Cookie settings" link is at the bottom of every page.

Learn more in the cookie policy.

RUICHI — home
Catalog
Contact us
BLD 2x05 *2 AWG26 0.3m — photo 1
  • Photo 1
  • Drawing 1

BLD 2x05 *2 AWG26 0.3m

RUICHI BLD 2x05x2 10-Pole Board-to-Board Power Cable (Socket-Socket), AWG26, 2.54 Pitch, 0.3 m

Drawing

Product overview
Item code90769
ModelBLD 2x05 *2 AWG26 0.3m

Specifications

ParameterValueSelect
CategoryCable Products › Cable Assemblies and Cords › Interface › Board-to-Board and Unit-to-Unit Power
Heightconnector - 5.2 mm
Depthconnector - 14.0 mm
Conductor Diameter (Cross-Section)0.12 mm2 (26AWG), insulation - PVC 0.4 mm
Operating Temperature Range0…+80 °C
Wire Lengthassembled 300 mm
Number of terminals10
Number of contacts2*5
Housing materialNylon 66 UL94V-0
Operating temperature0…+80 °C
Wire cross-section0.12 (26AWG) mm2
Cable typeBLD series board-to-board power cable (socket-socket)
Connector typeBLD 2x05 - 2x05, 10-pole, 2.54 pitch
Wire insulation colorred, black (PVC sheath Ø1.3 mm)
WidthB
Select parameters to find similar products

Description

Inter-board power cable (socket-socket) 10-pin RUICHI BLD 2x05x2, AWG26, with 2.54 pitch, 0.3 m. Different electrical voltages are used to power various computer components. The power supply unit has output connectors for 3.3 V, 5.0 V, 12 V and other voltages. Accordingly, all inter-board power cables that mate with these connectors are color-coded. Despite the abundance of wires supplying power to various computer components, the different connector configurations prevent incorrect connection. For example, the motherboard is powered via a wide 20-pin connector plus four additional pins; special connectors are installed on the wires going to the graphics card, hard drive, card reader, disk drives and fans. If connectors do not match due to a standard change, inter-board power cables are always available as adapters from one connector type to another. All these cables are strictly standardized in length, so they are clearly sufficient for connection within the system unit enclosure, while there is no excess of wires impeding air flow.

Documents and media

Product photo
Photo 1
Schematics and drawings
Drawing 1

Drawing

Drawing BLD 2x05 *2 AWG26 0.3m

Wheel — zoom, drag — pan, double-click — zoom inZoom — two fingers or double tap

Open original

Product inquiry

Technical questions, analog selection, samples and documentation. Reply will be sent to the email specified in the form.

BLD 2x05 *2 AWG26 0.3m

Item code 90769 · Board-to-Board and Unit-to-Unit Power

— required fields