Skip to content

Your choice is stored for a year. You can change it at any time — the "Cookie settings" link is at the bottom of every page.

Learn more in the cookie policy.

RUICHI — home
Catalog
Contact us
BLS-2 *2 AWG26 0.3m — photo 1

BLS-2 *2 AWG26 0.3m

RUICHI BLS-2 Board-to-Board Power Cable, AWG26, 2.54 mm Pitch, 0.3 m

Product overview
Item code90762
ModelBLS-2 *2 AWG26 0.3m

Specifications

ParameterValueSelect
CategoryCable Products › Cable Assemblies and Cords › Interface › Board-to-Board and Unit-to-Unit Power
Heightconnector body - 2.6 mm
Depthconnector body - 14 mm
Conductor Diameter (Cross-Section)0.12 mm² (26AWG), insulation - PVC 0.4 mm; dmax= Ø1.3 mm
Wire Length2*150 mm
Number of terminals2
Housing materialnylon PA66 (UL94V0), black
Operating temperature0…+80 °C
TypeBoard-to-board power connecting cable (F - F) 2 x BLS
Connector typeBLS-2, 2.54 mm pitch
Wire insulation colorred; black
Widthconnector body - 5.08 mm
Select parameters to find similar products

Description

RUICHI BLS-2 board-to-board power connection cable, AWG26, 2.54 mm pitch, 0.3 m. Different electrical voltages are used to power various computer components. The power supply unit has output connectors for 3.3 V, 5.0 V, 12 V and other voltages. Accordingly, all board-to-board power cables mating with these connectors are color-coded. Despite the abundance of wires supplying power to various computer components, the different connector configurations prevent incorrect connection. For example, the motherboard is powered via a wide 20-pin connector plus four additional pins; special connectors are installed on the wires going to the graphics card, hard drive, card reader, disk drives and fans. If connectors do not match due to a standard change, board-to-board power cables are always available as adapters from one connector type to another. All these cables have strictly standardized lengths, so they are clearly long enough for connection within the system unit enclosure, while there is no excess wiring that would impede airflow.

Documents and media

Product photo
Photo 1

Product inquiry

Technical questions, analog selection, samples and documentation. Reply will be sent to the email specified in the form.

BLS-2 *2 AWG26 0.3m

Item code 90762 · Board-to-Board and Unit-to-Unit Power

— required fields