BLS-4 *2 AWG26 0.3m
Board-to-board power cable, connecting (socket-socket) RUICHI BLS-4, AWG26, 2.54 mm pitch, 0.3 m
| Item code | 90764 |
|---|---|
| Model | BLS-4 *2 AWG26 0.3m |
Description
RUICHI BLS-4 board-to-board power connection cable (socket-to-socket), AWG26, 2.54 mm pitch, 0.3 m. Different electrical voltages are used to power various computer components. The power supply unit has output connectors for 3.3 V, 5.0 V, 12 V and other voltages. Accordingly, all board-to-board power cables mating with these connectors are color-coded. Despite the abundance of wires supplying power to various computer components, the different connector configurations prevent incorrect connection. For example, the motherboard is powered via a wide 20-pin connector plus four additional pins; special connectors are installed on the wires going to the graphics card, hard drive, card reader, disk drives and fans. If connectors do not match due to a standard change, board-to-board power cables are always available as adapters from one connector type to another. All these cables have strictly standardized lengths, so they are clearly long enough for connection within the system unit enclosure, while there is no excess wiring that would impede airflow.
Documents and media
- Product photo
- Photo 1
Product inquiry
Technical questions, analog selection, samples and documentation. Reply will be sent to the email specified in the form.
BLS-4 *2 AWG26 0.3m
Item code 90764 · Board-to-Board and Unit-to-Unit Power