Skip to content

Your choice is stored for a year. You can change it at any time — the "Cookie settings" link is at the bottom of every page.

Learn more in the cookie policy.

RUICHI — home
Catalog
Contact us
SM connector 2P*150mm 22AWG Male — photo 1

SM connector 2P*150mm 22AWG Male

Board-to-board power cable (plug) RUICHI SM connector, 2Px150 mm, 22AWG, 2.5 mm pitch

Documentation

Product overview
Item code98129
ModelSM connector 2P*150mm 22AWG Male

Specifications

ParameterValueSelect
CategoryCable Products › Cable Assemblies and Cords › Interface › Board-to-Board and Unit-to-Unit Power
Height7.6 (body) mm
Depth18.35 mm
Conductor Diameter (Cross-Section)0.3 mm² (22AWG), insulation - PVC 0.5 mm; dmax = Ø1.8 mm
Wire Length150 mm
Number of terminals2
Materialbody - nylon PA66 (UL94V0), black; contacts - phosphor bronze
Operating temperature0…+150 °C
Mounting methodSolder to board
TypeBoard-to-board power cable, plug (M) SM
Connector typeSM, 2.5 mm pitch
Wire insulation colorred/ black
Width13.1 mm
Select parameters to find similar products

Description

Inter-board power cable (plug) RUICHI SM connector, 2Px150 mm, 22AWG, with 2.5 mm pitch. Different electrical voltages are used to power various computer components. The power supply unit has output connectors for 3.3 V, 5.0 V, 12 V and other voltages. Accordingly, all inter-board power cables that connect to these connectors are marked in different colors. Despite the abundance of wires providing power to various computer components, the different connector configurations help avoid incorrect connection. For example, a wide 20-pin connector plus four additional pins is used to power the motherboard, and special connectors are installed on the wires going to the graphics card, hard drive, card reader, disk drives and fans. If the connectors do not match due to a change in standard, inter-board power cables are always available as adapters from one type of connector to another. All these cables are strictly standardized in length, so they are clearly sufficient for connection within the system unit case, and at the same time there is no excess of wires that would impede air flow.

Documents and media

Documentation
Documentation, PDF
Product photo
Photo 1

Product inquiry

Technical questions, analog selection, samples and documentation. Reply will be sent to the email specified in the form.

SM connector 2P*150mm 22AWG Male

Item code 98129 · Board-to-Board and Unit-to-Unit Power

— required fields