Skip to content

Your choice is stored for a year. You can change it at any time — the "Cookie settings" link is at the bottom of every page.

Learn more in the cookie policy.

RUICHI — home
Catalog
Contact us
SM connector 5P*600mm 26 AWG SET — photo 1

SM connector 5P*600mm 26 AWG SET

Board-to-board power cable assembly (socket-plug) RUICHI SM connector, 5Px600 mm, 26 AWG, 2.5 mm pitch

Documentation

Product overview
Item code98135
ModelSM connector 5P*600mm 26 AWG SET

Specifications

ParameterValueSelect
CategoryCable Products › Cable Assemblies and Cords › Interface › Board-to-Board and Unit-to-Unit Power
HeightF - 7.5 ; M - 7.6 (body) mm
DepthF - 12; M - 18.35 mm
Conductor Diameter (Cross-Section)0.12 mm² (26AWG), insulation - PVC 0.4 mm; dmax= Ø1.3 mm
Wire Length2*300 mm
Number of terminals5
Materialbody - nylon PA66 (UL94V0), black; contacts - phosphor bronze
Operating temperature0…+80 °C
Mounting methodSolder to board
Typeboard-to-board power cable assembly (F - M), SM series
Connector typeSM, 2.5 mm pitch
Wire insulation colorblack/ red/ white/ yellow/ orange
WidthF - 13 (body); M - 15.6 mm
Select parameters to find similar products

Description

Inter-board power cable assembly (socket-plug) RUICHI SM connector, 5Px600 mm, 26 AWG, with 2.5 mm pitch. Different electrical voltages are used to power various computer components. The power supply has output connectors for 3.3 V, 5.0 V, 12 V and other voltages. Accordingly, all inter-board power cables that connect to these connectors are color-coded. Despite the abundance of wires supplying power to various computer components, the different connector configurations prevent incorrect connection. For example, a wide 20-pin connector plus four additional pins is used to power the motherboard; special connectors are installed on the wires going to the graphics card, hard drive, card reader, disk drives and fans. If connectors do not match due to a standard change, inter-board power cables are always available as adapters from one connector type to another. All these cables are strictly standardized in length, so they are clearly sufficient for connection within the system unit case, while there is no excess wiring that would impede airflow.

Documents and media

Documentation
Documentation, PDF
Product photo
Photo 1

Product inquiry

Technical questions, analog selection, samples and documentation. Reply will be sent to the email specified in the form.

SM connector 5P*600mm 26 AWG SET

Item code 98135 · Board-to-Board and Unit-to-Unit Power

— required fields