Skip to content

Your choice is stored for a year. You can change it at any time — the "Cookie settings" link is at the bottom of every page.

Learn more in the cookie policy.

RUICHI — home
Catalog
Contact us
ТУТ клеевая 3.0/1.0 син — photo 1

ТУТ клеевая 3.0/1.0 син

RUICHI Adhesive-Lined Heat-Shrink Tubing TUT, 3.0/1.0 mm, 3:1 shrink ratio, 1 m, polyolefin, blue

Documentation

Product overview
Item code119905
ModelТУТ клеевая 3.0/1.0 син

Specifications

ParameterValueSelect
CategoryCable Accessories › Heat-Shrinkable Materials and Components › Heat-Shrink Tubing 3:1 › Adhesive-Lined Heat-Shrink Tubing 3:1
Pre-Shrink Diameter, mm3 mm
Diameter After Shrinkage, mm1 mm
Operating Temperature Range, °C-55…+125
Length, mm1000 mm
Shrink ratio3 : 1
Materialpolyolefin
NoteDiameter deviation before shrinkage up to 5% is possible
Operating voltage, max, V1.5 kV
Shrink temperature, °C100
TypeHeat-shrink tubing with adhesive layer
Wall thickness before shrinkage, mm0.42 mm
Packagingsupplied in packs in lengths in multiples of 1.0 m
Colorblue
Select parameters to find similar products

Description

Adhesive-Lined Heat-Shrink Tubing RUICHI TUT, 3.0/1.0 mm, 3:1 shrink ratio, 1 m, polyolefin, blue — one of the most common and reliable heat-shrink materials. The tubing is used to restore damaged insulation and create new insulation, seal surfaces and wire and cable connections, band and mark wires, and create anti-corrosion protective and decorative coatings. The inner surface of this tubing is coated with an adhesive layer. When heated, the adhesive melts and fills voids, ensuring a seal and bonding the joint to the object.

Documents and media

Documentation
Documentation, PDF
Product photo
Photo 1

Product inquiry

Technical questions, analog selection, samples and documentation. Reply will be sent to the email specified in the form.

ТУТ клеевая 3.0/1.0 син

Item code 119905 · Adhesive-Lined Heat-Shrink Tubing 3:1

— required fields