Skip to content

Your choice is stored for a year. You can change it at any time — the "Cookie settings" link is at the bottom of every page.

Learn more in the cookie policy.

RUICHI — home
Catalog
Contact us
ТУТ клеевая 4.8/1.6 кр — photo 1

ТУТ клеевая 4.8/1.6 кр

RUICHI Adhesive-Lined Heat-Shrink Tubing TUT, 4.8/1.6 mm, 3:1 shrink ratio, 1 m, polyolefin, red

Documentation

Product overview
Item code118145
ModelТУТ клеевая 4.8/1.6 кр

Specifications

ParameterValueSelect
CategoryCable Accessories › Heat-Shrinkable Materials and Components › Heat-Shrink Tubing 3:1 › Adhesive-Lined Heat-Shrink Tubing 3:1
Pre-Shrink Diameter, mm4.8 mm
Diameter After Shrinkage, mm1.6 mm
Operating Temperature Range, °C-55…+125
Length, mm1000 mm
Shrink ratio3 : 1
Materialpolyolefin
NoteDiameter deviation before shrinkage up to +1.5 mm is possible
Operating voltage, max, V1.5 kV
Shrink temperature, °C100
TypeHeat-shrink tubing with adhesive layer
Wall thickness before shrinkage, mm0.48 mm
Packagingsupplied in packs in lengths in multiples of 1.0 m
Colorred
Select parameters to find similar products

Description

Adhesive-Lined Heat-Shrink Tubing RUICHI TUT, 4.8/1.6 mm, 3:1 shrink ratio, 1 m, polyolefin, red — one of the most common and reliable heat-shrink materials. The tubing is used to restore damaged insulation and create new insulation, seal surfaces and wire and cable connections, band and mark wires, and create anti-corrosion protective and decorative coatings. An adhesive layer is applied to the inner surface of this tubing. When heated, the adhesive melts and fills voids, ensuring a seal and bonding the joint to the object.

Documents and media

Documentation
Documentation, PDF
Product photo
Photo 1

Product inquiry

Technical questions, analog selection, samples and documentation. Reply will be sent to the email specified in the form.

ТУТ клеевая 4.8/1.6 кр

Item code 118145 · Adhesive-Lined Heat-Shrink Tubing 3:1

— required fields