New in the catalog! RUICHI damped support shock absorbers.
RUICHI damped support shock mounts with a working load from 0.3 to 12 kg are designed to protect operating equipment from vertically applied vibration and shock loads and are used in heavy, aviation and oil and gas industries.
RUICHI Damped Support Shock Absorbers of the AD series with a working load from 0.3 to 12 kg are designed to protect operating equipment from vertical vibration and shock loads. The shock absorbers are used in the heavy, aviation and oil and gas industries, in air conditioning and ventilation systems.

The shock absorber housing contains two main components that provide protection against vibration and shock loads. The main damping device is a rubber chamber (bladder). At the bottom, the bladder is vulcanized to a metal flange with a calibrated hole. The hole diameter is calculated so that under loads the air passing through the hole is retarded, creating a friction effect.

The entire damping system is stabilized by a conical spring located inside the bladder. The housing, support plate and rod of the shock absorber are made of metal. To limit the ingress of moisture and abrasive particles into the working area, a rubber seal is mounted between the housing and the rod.
For mounting equipment, the shock absorber rod has a calibrated threaded hole. The support plate is also provided with four holes for fastening to a flat surface.
The optimal conditions for using RUICHI AD series shock absorbers are:
- ambient temperature - from -60 to +70 °C;
- relative humidity of ambient air - 95%-98% at a temperature of 20±2 °C;
- atmospheric pressure - up to 25.3 hPa;
- vibration at a frequency of 15 Hz, 40 Hz, 80 Hz with acceleration of 4.4 m/s2, 31.4 m/s2, 49.0 m/s2, respectively;
- shock load of 10 000 impacts with acceleration of 39.2 m/s2 and a shock pulse duration of 0.015 s - 0.005 s.
- RUICHI AD-1A-0.6 damped support shock absorber, 0.3...0.6 kg, M3 thread, body diameter 27 mm, -60...+70 °C
- RUICHI AD-2A-1 damped support shock absorber, 0.6…1 kg, M3 thread, body diameter 27 mm, -60...+70 °C
- RUICHI AD-3A-1.5 damped support shock absorber, 1…1.5 kg, M5 thread, body diameter 39 mm, -60...+70 °C
- RUICHI AD-4A-3 damped support shock absorber, 1.5…3 kg, M5 thread, body diameter 39 mm, -60...+70 °C
- RUICHI AD-5A-5 damped support shock absorber, 3…5 kg, M5 thread, body diameter 39 mm, -60...+70 °C
- RUICHI AD-6A-7 damped support shock absorber, 5…7 kg, M5 thread, body diameter 39 mm, -60...+70 °C
- RUICHI AD-7A-10 damped support shock absorber, 7…10 kg, M6 thread, body diameter 58 mm, -60...+70 °C
- RUICHI AD-8A-14 damped support shock absorber, 10…12 kg, M6 thread, body diameter 58 mm, -60...+70 °C