Skip to content

Your choice is stored for a year. You can change it at any time — the "Cookie settings" link is at the bottom of every page.

Learn more in the cookie policy.

RUICHI — home
Catalog
Contact us
запрессовочная S-M8-2 — photo 1
  • Photo 1
  • Drawing 1

запрессовочная S-M8-2

Press-fit round threaded nut S-M8-2 RUICHI, zinc-plated steel

Drawing

Product overview
Item code114321
Modelзапрессовочная S-M8-2

Specifications

ParameterValueSelect
CategoryFasteners › Nuts › Press-Fit Nuts
Outer diameter, mmE = 12.65 ±0.25
Inner diameter, mmC = 10.47
Mounting Height, mmA = 2.21
Height, mmT = 5.47 ±0.25
MaterialGalvanized steel
Mounting hole, mm10.5 +0.08
ThreadM8
TypePress-fit nut M8
Metal thickness, mm2.3 mm
Thread pitch1.25
Select parameters to find similar products

Description

S-M8-2 RUICHI press-fit nut made of galvanized steel provides a standard internal thread in thin sheets with high pull-out and torque resistance. The press-fit nut is installed into a pre-prepared hole using a press, as a result of which the base material fills a special skirt-shaped groove under the head. The serrated knurling prevents the nut from turning. After installation, the fastener does not protrude beyond the workpiece.
The letter S in the name denotes a standard nut; material — hardened carbon steel. Coating: zinc. Recommended for use in steel or aluminum sheets with hardness up to 80 HRB / 150 HB.

Documents and media

Product photo
Photo 1
Schematics and drawings
Drawing 1

Drawing

Drawing запрессовочная S-M8-2

Wheel — zoom, drag — pan, double-click — zoom inZoom — two fingers or double tap

Open original

Product inquiry

Technical questions, analog selection, samples and documentation. Reply will be sent to the email specified in the form.

запрессовочная S-M8-2

Item code 114321 · Press-Fit Nuts

— required fields